Contact-form sales outreach is a way of sending sales messages through the inquiry forms on companies' websites. When you read each company's site one by one, tailor the message to each, and fill in the form, the number you can send in a day quickly hits a ceiling. That is when you start thinking about automation, but the more you send, the greater the risk that your message becomes a nuisance to the recipient.
This article splits contact-form outreach into four stages and explains how much to hand to a machine and where a person should decide. It also covers the key legal points, how to handle "no sales inquiries" notices, and the steps and limits of handing the work to Samurai App's AI agent.
Conclusion
- Contact-form outreach splits into four stages: building the list, writing the message, filling in the form, and sending. The first three are easy to hand over, and it is safest to leave the decision of whether to send with a person.
- Japan's Act on Regulation of Transmission of Specified Electronic Mail, which regulates advertising emails, defines "electronic mail" as mail using communication methods specified by ordinance of the Ministry of Internal Affairs and Communications. Whether sending through a form falls under this is not addressed in the ministry's pamphlet, and opinions differ. Rather than assuming it does not apply, it is safest to send in line with the law's principles (consent, disclosure, and honoring refusals).
- Do not send to forms that say "Please refrain from contacting us for sales purposes." If you automate, build this decision into the procedure.
- Samurai App has no feature dedicated to contact-form outreach. You build it by having the AI agent operate the browser. It stops and asks for confirmation before sending, so a person can review the message before it goes out.
Why Contact-Form Outreach Takes So Long
Done by hand, the following work repeats for every company.
- Open the company's site from the sales list
- Read about their business and rewrite the message to fit them
- Open the contact form page and fill in the company name, contact name, and body one field at a time
- Check for a "no sales inquiries" notice and send
Each step is simple, but you have to switch gears for each company. A message shared across all companies is faster, but mass sending that does not fit the recipient gets fewer replies and is more likely to be seen as a nuisance.
Three Forms of Automation
| Form | What it handles | Good for | Watch out for |
|---|---|---|---|
| Form-sending tools | From building the list to sending | Sending the same message to many companies in a short time | Messages tend to become uniform. Do not leave the "no sales inquiries" check entirely to the tool |
| AI agent | Reading sites, drafting messages, filling in | Tailoring the message to each company | Each company incurs AI processing costs. A person does the check before sending |
| Outsourced sales agency | All stages | When you have no staff in-house | Agree on the message and the criteria for recipients at the start |
Whatever the form, how you choose recipients and the quality of the message determine the number of replies. Before increasing the volume, decide which companies to contact and what to tell them.
What to Check About the Law and Courtesy
Key Points of the Act on Regulation of Transmission of Specified Electronic Mail
The Ministry of Internal Affairs and Communications' pamphlet on the key points of the act summarizes them as follows.
- Opt-in: In principle, advertising emails may be sent only to people who have consented in advance.
- Exceptions where you may send without consent: People who gave you their email address on a business card or similar, and people who publish their email address on the internet (for individuals, only those engaged in business), among others. However, if they publish "Please do not send advertising emails" together with the address, you may not send without consent.
- Disclosure requirements: Show the sender's name or company name, that the recipient can refuse further emails, and where to send the refusal, among other things.
- Refusals: Once you receive a refusal, you may not send again.
- Penalties: Sending with falsified sender information and similar acts carry penalties, including fines of up to ¥30 million for corporations.
The act defines "electronic mail" as mail that uses communication methods specified by ministry ordinance (Article 2). The pamphlet does not say whether entering a message into a contact form falls under this. If you are unsure, consult a lawyer.
What to Observe Apart From the Law
Separately from whether the law applies, decide the following from the recipient's point of view.
- Respect "no sales inquiries" notices. If there is wording near the form or in the terms of use declining sales contacts, do not send.
- Identify yourself. Write your company name, your name, and your contact details in the body.
- Stop when refused. Remove companies from the list that reply "No further contact needed."
- Do not send to the same company repeatedly. Also avoid sending the same message to each department's form.
- Do not misuse the form's options. When the only options are things like "Request a quote," do not disguise a sales message as an inquiry.
How to Structure a Message People Will Read
Even with automation, a low-quality message gets no replies. The recipient reads contact-form messages alongside other inquiries, so make the purpose clear in the first few lines.
- State who you are and why you are writing in the first line. For example, "This is [your name] from [your company]. I am writing with a proposal about [topic]." Do not hide that it is a sales message.
- Include one sentence that refers to their business. Be specific, based on what you read on their site, such as "I saw that you have been opening more [type of] stores." If this sentence is the same for every company, it reads as mass mail.
- Limit the proposal to one point. Do not list product features; write only the one point likely to relate to their business.
- Make the next step easy for them. Close with a question that is easy to answer, such as "May I send you some materials?"
- Include your contact details and how to tell you no further contact is needed. Also state that you will not write again if told so.
When you ask AI for a draft, giving it these five points as a template keeps the length and tone of the messages consistent.
How to Do It With Samurai App
Samurai App's AI agent operates the browser to open the company's site, reads about their business, drafts the message, and fills in the contact form. There is no dedicated screen for contact-form outreach; you ask in a conversation and proceed.
1. Prepare the Recipient List and Rules
Prepare an Excel file listing company names and site URLs. Also write down the message template and the conditions for not sending.
- An introduction of your company, and a paragraph to tailor to each recipient
- Conditions for not sending (a "no sales inquiries" notice, no form found, an image CAPTCHA, and so on)
- The company name, contact name, and contact details to identify yourself with
2. Ask One Company at a Time
Attach the Excel file to the conversation and ask like this.
Open the site of the company in row 1 of the attached list, read about their business, and draft a message using the template below. Find the contact form and go as far as filling it in. If there is wording near the form or in the terms of use declining sales inquiries, stop without filling it in and tell me what it says. Always stop before sending
At first, ask for one company at a time and check that the message and the handling of the form are what you expected.
3. Check the Contents Before Sending
On the page, the agent stops before irreversible operations such as sending or ordering and asks for confirmation. The actual form screen appears in the right-hand panel, so you can review what was entered before approving.
If you press "Always allow for this session" or "Always allow from now on" on the page-operation confirmation card, it will no longer stop before sending on that site. If you want to check each message, proceed with "Approve and run."
4. Write the Results Back to the List
Ask it to write the date and time sent, and the reason for not sending (no sales inquiries, no form, and so on), back into columns of the Excel list. You can use this the next time you send, or when checking a reply.
5. Save the Process as a Skill
If you turn the message template that worked and rules like "Do not send to forms that say no sales inquiries" into a skill, the work follows the same procedure no matter who asks.
For more, see the contact-form sales outreach page and the AI agent feature.
Limits and Where It Doesn't Fit
- It does not solve CAPTCHAs. When an "I'm not a robot" check or an image-selection check appears, a person operates it in the right-hand panel.
- Some sites cannot be opened. The cloud browser connects from an address outside your company, so some sites refuse the connection. In that case, ask again to open the site in your own Chrome (through the browser extension or the CLI).
- It is not suited to sending large volumes unattended. Even in a published workflow, it always stops before irreversible operations such as sending.
- The "no sales inquiries" check is not perfect. The AI reads the wording on the page, and may miss text inside images or terms of use on another page. A person should look during the check before sending.
- Each company incurs AI processing costs. Reading the site and writing the message uses credits, so decide on the number of companies before starting.
- It cannot operate sites where an administrator has prohibited browser operation.
Frequently Asked Questions
Is contact-form sales outreach illegal?
Within what we checked for this article, we found no statutory provision that prohibits contact-form outreach itself. However, opinions differ on whether the Act on Regulation of Transmission of Specified Electronic Mail extends to sending through forms. If you operate by respecting "no sales inquiries" notices, identifying yourself, and stopping when refused, you are less likely to bother recipients, whether or not the law applies.
Should I not send if it says no sales inquiries?
Do not send. Under the Act on Regulation of Transmission of Specified Electronic Mail as well, if a refusal of advertising emails is published together with the email address, you may not send without consent. It is safest to treat forms the same way.
How many may I send per day?
There is no rule on the number. The more you send, the more checking there is, so keep to a number where a person can review the contents before sending.
How can I improve the reply rate?
Narrow down your recipients, and include a sentence that refers to their business. A message written after reading the recipient's site is more likely to be read than one shared across all companies.
Sources
- Key points of the Act on Regulation of Transmission of Specified Electronic Mail (Ministry of Internal Affairs and Communications)
- Act on Regulation of Transmission of Specified Electronic Mail (e-Gov Laws and Regulations Search)
- Anti-spam measures (Ministry of Internal Affairs and Communications)
- Spam Consultation Center (Japan Data Communications Association)
- Browser in the conversation's right-hand panel (Samurai App documentation)
Based on the Ministry of Internal Affairs and Communications' published materials and Samurai App's documentation as checked on November 9, 2026.